The engraving area is 300mm × 300mm.
With the 7W laser, at 100% power and 120mm/min speed, it can cut 4mm plywood in one pass. With the 12W laser, at 100% power and 110mm/min speed, it can cut 7mm plywood in one pass.
AtomStack offers a 1.8W infrared laser module that is compatible with the Swift.
It can engrave small portions of metal such as black anodized aluminum, stainless steel, galvanized iron, etc. With an infrared laser module, it can engrave most metals.
Note:
- Cutting metal is not recommended due to the low power.
Yes. You need to download the AtomStack Studio Beta version to use WiFi. Under normal circumstances, a wired connection is recommended.
Yes. You will need the R6 or R8 rotary attachment. Please refer to the "Swift Rotary Attachment Connection" section.
Yes.
Note:
- 7W laser: Engraving bitmap — 10,000mm/min, 30% power. Cutting 1mm leather — 500mm/min, 100% power.
- 12W laser: Engraving bitmap — 10,000mm/min, 20% power. Cutting 1mm leather — 700mm/min, 100% power.
Yes. Please refer to the "Swift Rotary Attachment Connection" section.
We recommend the FB2 protective enclosure.
The D3 purifier is recommended.
Note:
- It must be used together with an enclosure, such as the FB2.
Yes. The Swift has a dedicated air assist with a special air nozzle. See the "Swift Air Assist Connection" section for details.
Yes. The dedicated F2N honeycomb panel is available, sized 350mm × 350mm.
Yes. The power button can quickly cut off power.
Yes. You can install an extension kit to enlarge the working area to 300mm × 600mm.
Compatible with AtomStack Studio, AtomStack APP, and LightBurn.
Note:
- Not recommended: LaserGRBL, because it does not stably support the 460800 baud rate, which may cause stuttering or data errors.
Blue-light laser: 0°C – 35°C. Infrared laser: 10°C – 30°C.