¶ 1. What Is the Engraving Area of Atelier?
Answer: 120 mm × 120 mm. Using the conveyor feeder, the area can be expanded to 350 mm × 120 mm.
¶ 2. Can Atelier Engrave Metal?
Answer: Yes, it can engrave some metals such as stainless steel, iron, and black anodized aluminum.
¶ 3. Can Atelier Connect to a Computer via WiFi?
Answer: Yes. You need to first connect Atelier for network setup using a Type-C cable. Refer to the Atelier PC Connection Video for guidance.
¶ 4. What Is the Laser Power of Atelier, and Can It Be Replaced With Another Laser?
Answer: The standard configuration is a 12W diode laser (wavelength 455±5 nm). Currently, it cannot be used with other lasers.
¶ 5. Can Atelier Be Used With a Rotary Device?
Answer: Yes. It supports R6, R8, and R8 PRO rotary accessories with auto-recognition. Refer to the Atelier Rotary Device Connection and Usage Video for guidance.
¶ 6. Can the Engraving Area of Atelier Be Expanded?
Answer: Yes. Using the R4 conveyor feeder, the engraving area can be expanded to 350 mm × 120 mm.
¶ 7. What Software Does Atelier Use, and Can LightBurn Be Used?
Answer: You can use the official AtomStack Studio (PC or mobile) or LightBurn software. When using LightBurn, you can import the official configuration file to connect the device. Select "L1-GALVO" as the controller (see Figure 12). Alternatively, you can connect without importing the configuration file by following the connection steps. Refer to the "Atelier Network Connection" section for guidance.
Figure 12
¶ 8. What Is the Maximum Engraving Speed of Atelier?
Answer: The maximum speed can reach 240,000 mm/min. For actual engraving tasks, please follow the recommended parameters in the parameter table.
¶ 9. Does Atelier Have Fixtures to Secure Materials?
Answer: Yes. Two positioning strips are provided, which can be secured to the baseplate using screws. A roll of masking tape is also included for fixing thin or light materials to the baseplate.
¶ 10. Does Atelier Have Safety Features?
Answer: Yes. The machine is equipped with a power switch to turn off the device at any time, and a USB key to prevent unauthorized operation, protecting children or untrained users from accidents.
¶ 11. What Is the Normal Operating Temperature of Atelier?
Answer: The recommended operating temperature is 0°C to 35°C.
¶ 12. What Is the Maximum Material Height That Atelier Can Engrave?
Answer: The machine can engrave materials up to 105 mm in height inside the enclosure. With the baseplate removed, it can theoretically engrave objects of any height.
¶ 13. How Should Atelier Be Stored When Not in Use?
Answer: When the machine will not be used for an extended period, store it in a dry environment. It is recommended to power on the machine for 5 minutes each month to maintain the lifespan of the electronic components.