Answer: Kraft adopts a fully enclosed design and is certified as Class 1 according to IEC/EN 60825-1, meeting Class 1 laser safety requirements. A safety interlock mechanism automatically stops laser emission when the door is opened, preventing potential harm to personnel. The viewing area is sealed with a light-filtering material, so no protective eyewear is required when the door is closed.
Answer: Yes, it can. Kraft is equipped with an infrared and blue laser system, making it suitable for most materials. For metal materials, it is recommended to use the infrared laser or the dual-mode infrared-blue laser. For specific settings, please refer to the Kraft Engraving Parameters Table. How to view the Kraft parameter table: ① Enter to view by scanning the QR code on the engraving machine. ② Enter the official website to view https://atomstack.com/pages/product-support. ③ Contact customer service staff to request it.
Answer: No, air assist is not included with Kraft by default. You will need to purchase the F70 fire-extinguishing air pump separately. The F70 not only provides standard air assist functionality but also includes an automatic fire extinguishing feature. Please note that to use the fire extinguishing function, you must fill the F70's water tank with water. The two power connectors should be connected respectively to the air assist power output port and the fire pump power output port on the Kraft machine. Please refer to the user manual or the Kraft control panel guide for detailed instructions.
Answer: Yes, it can. The recommended rotaries are R6, R8, and R8 Pro, all of which support automatic recognition. When using AtomStack Studio, the R6 can be used without any additional setup. For the R8, you'll need to input the diameter or circumference of the material. If you are using LightBurn software, configuration is required based on the type of rotary device being used. For detailed instructions, please refer to the "Kraft Rotaries Application" section.
Answer: The default engraving area is 500 × 320 mm. With the R7 conveyor feeder, it can be expanded to 500 × 800 mm. Please note that using the R7 requires purchasing the H4 riser separately.
Answer: Yes, it can. By using the R7 conveyor feeder, the working area can be expanded to 500 × 800 mm. Please note that the H4 riser must be purchased separately when using the R7.
Answer: Inside the enclosure (without removing the baseplate), the maximum material thickness for engraving --- without a honeycomb panel --- is 55 mm. If the baseplate is removed, theoretically there is no limit to the material thickness, as long as the four support feet of the machine are placed on a stable and level surface. If the H4 riser is used, it can add up to an additional 100 mm of height.
Answer: No, it is not. Both the laser module mounting and wiring are different from those of other machines. However, Kraft's 40W laser module and the dual laser module (20W + 1.2W blue and infrared laser) are interchangeable with each other.
Answer: Yes, it can. Leather can be engraved using the blue laser mode, infrared mode, or dual-laser mode. For specific settings, please refer to the parameter table. How to view the Kraft parameter table: ① Enter to view by scanning the QR code on the engraving machine. ② Enter the official website to view https://atomstack.com/pages/product-support. ③ Contact customer service staff to request it.
Answer: Yes, Kraft is supplied with a honeycomb table.
Answer: Yes, it can. The compatible model is the CR1 touchscreen. Please note that the HDMI port on the Kraft enclosure must not be connected to any other devices that supply voltage, such as third-party touchscreens, monitors, or TVs.
Answer: Yes, Kraft supports Wi-Fi connectivity and can be controlled via a mobile APP. Please refer to the unboxing and setup video for instructions on how to connect and operate the machine using the APP.
Answer: Kraft can be operated using AtomStack Studio, LightBurn, and the AtomStack mobile app.
Answer: Currently, Kraft supports two compatible laser modules: the 20W + 1.2W dual-laser module (blue laser + infrared) and the 40W variable-power laser module.
Answer: Yes, we recommend the AtomStack D4 purifier. The exhaust fan flange has a diameter of 75 mm, and the included ventilation hose has a diameter of 76 mm (compressed length: 160 mm; extended length: 2 meters).
Answer: During testing, the ambient noise level was 48.3 dB. The noise level was 72 dB during horizontal engraving and 81.9 dB during vertical engraving.
Answer: